Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Harlem
If you own, manage, or sit on the board of a pre-war building in Harlem, you already know that ductwork here is a different animal. The runs tucked inside these walls are often original galvanized metal or mid-century retrofits shoehorned around steam risers, and decades of use leave real problems behind them. We work with Harlem building owners, managing agents, co-op boards, and residents on duct repair and sealing that actually addresses what’s inside those chases: crushed branches, failed seams, and connections that came loose a long time ago. Call (877) 792-7271 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Harlem Homeowners Call Air Duct Cleaning Washington Heights for Duct Repair & Sealing
Harlem is a specific kind of place to do this work, and our technicians have up to 13 years of experience reading the buildings here: the brownstones and tenements of the late 1800s, the 1930s to ’50s elevator blocks, and the NYCHA developments scattered across the neighborhood. That matters because the problems we find on Harlem jobs aren’t the same as the ones in a new-build with flex duct. A branch disconnected behind a chase wall, a seam gap that’s been pulling soot out of a neighboring unit for decades, a retrofit around a steam riser that finally let go: these take someone who knows what they’re looking at.
We’re familiar with the corridors people actually call from. A managing agent coordinating a multi-unit job in the blocks between Frederick Douglass Boulevard and Adam Clayton Powell Jr. Boulevard gets a different scoping conversation than a co-op board near Morningside Park or a brownstone owner off Lenox Avenue. Our technicians bring professional-grade equipment to every job, including Rotobrush, Nikro, and Abatement Technologies systems, so the work is documented and containment-grade rather than a shop-vac pass at the visible registers.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Harlem
The work we do in Harlem splits into a handful of categories, and it’s rare that a job needs only one of them. Here’s what each involves and where it tends to come up in this neighborhood.
Metal Duct Repair
Original galvanized sheet-metal runs are the backbone of most pre-war Harlem ductwork, and they’re also where the worst failures hide. A crushed branch or a fully disconnected run behind a chase wall dumps conditioned air and soot into the cavity instead of the room. We use camera inspection and agitation tools under negative pressure with HEPA filtration to find and document the break, then repair the metal rather than patching over it.

Mastic Sealant
Mastic sealant is what closes the joint gaps and seam failures on old metal ducts that no amount of cleaning will fix. On heating-season-heavy Harlem buildings, those gaps leak air into wall cavities and pull soot from adjacent units. Sealing with mastic is the step that keeps a cleaning holding instead of re-contaminating within a season.

Duct Sealing
Duct sealing is the broader fix that ties repair and mastic work together. Where joints, seams, and connection points leak, we seal them so the system delivers air where it’s supposed to. In a brownstone or tenement where ducts share a chase with the neighboring apartment, that sealing job also has to be documented unit by unit, which we’ll get to below.

Flex Duct Repair
Some Harlem retrofits, especially mid-century and later additions, use flex duct rather than the original metal. Flex doesn’t hold up the way galvanized does; it sags, tears, and pulls loose where it meets metal at the transition. We repair or re-seat those runs so the connection is sound and the airflow actually reaches the room.
Duct insulation and air leak repair round out the picture when a sealing job calls for them. If you’re not sure which of these your building needs, our duct repair & sealing team can walk you through it on a free estimate.
Trusted Brands We Service in Harlem
We work with filtration and air-quality components from brands like Honeywell and Aprilaire when a sealing job calls for a filter upgrade or a system diagnosis, and our Abatement Technologies and Nikro equipment handles the containment and cleaning side. We don’t stock parts or keep a warehouse in Harlem, so any components a job needs are sourced to order and the finished work is scheduled around the estimate you approve. That means turnaround depends on what the inspection turns up rather than what’s sitting on a shelf.
Common Duct Repair & Sealing Problems We See in Harlem Homes
The failures below come up again and again in this neighborhood, and each one has a specific cause tied to how these buildings were built and how they’ve aged.
- Crushed or disconnected branches hidden in shared chases. In pre-war brownstones and tenements, a sheet-metal branch can be crushed or fully disconnected inside the wall, and you won’t know until a camera inspection during a routine cleaning turns it up.
- Failed joints and seam gaps on original galvanized duct. Decades of heating-season cycling work the seams loose on old metal runs, and every gap leaks conditioned air into the cavity while pulling soot in from the neighboring unit.
- Loose retrofits around steam risers. Many Harlem buildings still run steam heat, and where supply or return air was retrofitted around a riser, mismatched flex or metal connections tend to come loose over long, cold winters.
- Decades of soot from the coal- and oil-heat era. Buildings that have never had their ducts cleaned carry a black residue from old heating fuels, and dense traffic corridors add to the particulate load. That soot is what a cleaning has to lift without letting it drift into the next apartment.
Why Harlem Duct Work Is a Shared-Chase Job
Here’s what makes this neighborhood different from almost anywhere else: in Harlem’s brownstones and tenements, ducts frequently share a common vertical chase with the neighboring unit. That means sealing or repairing a single branch can push soot or pressure changes straight into the apartment next door. This is why co-op boards and managing agents in Harlem require per-unit before-and-after photo logs before signing off on a job. It’s not bureaucracy; it’s the only way to prove that work on one unit didn’t disturb another. Any contractor who doesn’t document per unit isn’t set up for how Harlem buildings actually work.
See the difference
Before
After
Before
After
Before
AfterWhat a Typical Duct Repair Job Looks Like in Harlem
In a pre-war Harlem walk-up, a routine cleaning on original galvanized supply and return ducts often turns up a crushed or fully disconnected branch hidden behind a chase wall, with decades of black soot and lead-era dust sitting in the run. Using camera inspection and agitation tools under negative pressure with HEPA filtration, a qualified local pro documents the break, then seals joints and gaps with mastic sealant and repairs the metal run rather than patching over it. That distinction matters: a disconnected duct dumps conditioned air and soot into the wall cavity instead of the room, so a patch job just hides the problem. Repairing the run and sealing it is what makes the fix hold.
Pricing for Duct Repair & Sealing in Harlem, NY
Pricing here is set per job by a written estimate, and the inspection is what determines it. A few honest ranges for planning: a typical mastic sealing job on a single-unit metal duct system in Harlem runs roughly $350 to $750 depending on how many joints and runs are involved. A disconnected or crushed branch repair typically runs $300 to $650 for the metal work, and a full duct repair and sealing combined on an older pre-war system often lands between $800 and $1,600. Multi-unit jobs for a co-op board or managing agent are scoped per unit and quoted as a whole. What moves the number is access to the chase, how many failed joints the camera finds, and whether the run needs metal repair or just sealing. The estimate is free and the written quote sets the final price.
We Also Serve Cities Near Harlem
Our service area reaches beyond Harlem into the surrounding neighborhoods: Mott Haven, Concourse, Melrose, and Highbridge are all within reach. If you manage or own property in one of these areas and need duct repair and sealing, the same equipment and documentation approach applies. Call and we’ll get you on the schedule for a free estimate.
Serving Harlem, NY – Our Local Coverage Area
We serve Harlem and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Harlem
Because ducts in many Harlem buildings share a common chase, work on one unit can affect the neighbor, so boards require per-unit photo documentation before approval. We capture before-and-after photos of your own ducts as part of every job, which gives the board exactly what it needs to sign off. Call (877) 792-7271 for an estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
In most cases original galvanized ducts can be repaired and sealed rather than replaced. Old metal that’s physically intact takes mastic sealant at the joints and seams, and disconnected runs can be reattached. Replacement only comes up when a run is too far gone to repair, which the camera inspection will show. Call (877) 792-7271 for a free estimate and we’ll tell you what we find.
With negative pressure and HEPA filtration so the soot is captured rather than pushed into the living space or the neighboring unit. Our Abatement Technologies and Nikro equipment is built for containment-grade work, which is what decades-old coal- and oil-era residue demands. Call (877) 792-7271 to schedule an estimate.
Often yes, because a camera inspection finds the break and the repair can be made through a limited access point rather than a full wall opening. How much access is needed depends on where the branch sits in the chase. Call (877) 792-7271 for a free estimate and we’ll scope the access before any work starts. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
As a per-unit proposal with shared documentation, quoted as a whole for the building. We inspect unit by unit, note which branches share a chase, and put the scope and per-unit pricing into one written estimate for the board or agent to approve. Call (877) 792-7271 to start the scoping conversation.
Whether you own a brownstone off Lenox Avenue, manage a block of pre-war apartments, or sit on a co-op board that needs per-unit documentation, the work starts with a look at what’s actually inside the chases. Professional-grade equipment, residential pricing, and a written estimate before anything begins. Call (877) 792-7271 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Washington Heights.