Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Melrose
If the register in one room barely pushes air while the one by the riser roars, you don’t need a bigger furnace. You likely have a loose, crushed, or leaking duct run. In Melrose the fix is usually reconnecting and sealing that run, not replacing a whole HVAC system. We work on short horizontal runs, retrofitted flex duct, and shared chases in the pre-war walk-ups around Melrose (10455), and we plan access with landlords and tenants before anyone shows up. The local pro we connect you with is licensed and insured as their state requires, and the written estimate sets the price before work starts. Call (877) 792-7271. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Melrose Homeowners Call Air Duct Cleaning Washington Heights for Duct Repair & Sealing
For a neighborhood this dense, most duct work in Melrose is building work. Our technicians have up to 13 years of experience, and that experience includes the kind of job where a single run crosses two apartments off a shared interior chase. That isn’t a suburban one-house call. It takes coordinating with a landlord, getting each tenant’s access confirmed, and then doing the sheet-metal and mastic work without blowing chase dust into the neighboring unit.
We use professional-grade equipment on every job. Rotobrush and Nikro systems belong in the same category as industrial IAQ equipment, not the shop-vacs and repurposed blowers some crews arrive with. Abatement Technologies filtration is part of the lineup too, which matters when a shared shaft is under negative pressure and dust is the last thing you want migrating. On top of the repair and sealing work, our service menu covers cleaning, sanitizing, and filtration through brands like Honeywell and Aprilaire, so we can trace a root cause instead of just vacuuming a duct.
We know the territory. The mix of original gravity chases, retrofitted flex, and window units in these Melrose walk-ups shapes how we approach each repair. You’ll get a flat price per system agreed before work starts, and before-and-after photos of your own ducts so you can see what changed.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Melrose
We handle duct repair and sealing as a coordinated set of jobs, because in Melrose buildings they rarely come one at a time. Here’s what each one covers.
Flex Duct Repair
Retrofit flex duct is everywhere in Melrose, and it’s also the most common failure. A run pulled loose from its collar inside a shared chase dumps conditioned air into the wall cavity instead of the register. We reconnect it and fasten it mechanically, so it doesn’t slip again the first time someone closes a closet door.

Mastic Sealant
Tape and caulk fail on duct seams over time, especially where the run passes through a cold chase. Mastic sealant is a thicker, durable coating that bonds to metal and stays put through seasonal expansion and contraction. In a Melrose walk-up, mastic is often what makes a sealing job last more than one winter.

Metal Duct Repair
Original convection chases and older metal runs were built without real seams or sealing. Repairing them means closing those gaps, patching crushed sections, and making sure return-side air isn’t being drawn from a neighboring unit. This is the part of the work that most changes how evenly a Melrose apartment heats.

Duct Insulation
Uninsulated runs in older buildings collect condensation, and in Melrose’s humid summers that moisture is where mildew starts near window units and shared shafts. Insulating the run reduces condensation and keeps the air delivered closer to the temperature it started at. It also protects newly sealed joints from the moisture cycles that shorten their life.
If you want the bigger picture of how these pieces fit together, our duct repair & sealing services walk through the full approach.
Trusted Brands We Service in Melrose
We work with whatever your building already has, and we integrate filtration and air-quality equipment from Honeywell and Aprilaire where it solves a real problem. We don’t claim to stock parts locally. What we do is diagnose accurately, then coordinate the right repair for the system in front of us. In Melrose’s older buildings, that often means adapting to what a retrofit left behind rather than working to a manufacturer’s original spec. If a run has been modified three times over several decades, we inspect it with a camera before deciding what to repair and what to replace.
Common Duct Repair & Sealing Problems We See in Melrose Homes
- Retrofit flex pulled off its collar. In a shared chase, a loose run dumps air into the wall cavity and starves the register it was meant to feed. It’s a small fix once it’s found, but you can’t find it without a camera and access.
- Original convection chases with no seams or sealing. These were never meant to be a sealed system, so return-side air gets drawn from neighboring units and the chase itself. Sealing what can be reached reduces that cross-draw.
- Mildew near window-AC ductwork in summer. Humid apartments wet uninsulated runs and joints, and that’s where growth starts. Insulation and sealing cut the moisture cycle.
- Crushed runs behind closet walls. Older renovations sometimes boxed in a duct without realizing it, and crushing it. The symptom shows up as one cold room in an otherwise warm apartment.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Melrose, NY
Pricing in Melrose is per job by written estimate, and the estimate is free. Typical ranges in this market look like this: reconnecting and sealing a single flex run in a shared chase usually runs $180 to $400. Mastic sealing across multiple accessible joints runs $300 to $650. Repairing a crushed or damaged metal run is typically $350 to $800. Insulating an exposed run in a cold chase runs about $250 to $550. A multi-unit landlord-coordinated job with camera inspection across several apartments is quoted as a single scope. The written estimate sets the final price, and it’s agreed before work starts. No per-vent pricing, no coupon figure that grows once the technician is on site.
We Also Serve Cities Near Melrose
We work across the wider South Bronx, including Mott Haven, Longwood, Morrisania, and Concourse. If you’re in one of these neighborhoods, the same shared-chase and pre-war-building considerations usually apply. Serving Melrose and the surrounding blocks means we’re familiar with the building stock and how to coordinate access across units. If you’re outside Melrose and want to know whether your building fits the same pattern, call and describe the layout.
Serving Melrose, NY – Our Local Coverage Area
We serve Melrose and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Melrose
Because the run itself crosses apartments. In Melrose’s pre-war walk-ups, a single duct system is often a short horizontal run feeding one or two units off a shared interior chase. When a run slips off its collar or gets crushed, the repair may need access from the ceiling or wall of the neighboring unit to reach it. That makes it a landlord-coordinated, unit-by-unit effort rather than one whole-house retrofit.
It looks for what you can’t see from the register: a flex run that has slipped off its collar, a crushed section behind a closet wall, seams or penetrations with no mastic, and moisture where an uninsulated run has been collecting condensation. Camera inspection is how we avoid guessing. In older buildings it usually shows an original gravity chase retrofitted with flex duct, and the failure is at the connection point, not the furnace. Call (877) 792-7271 for an exact quote; estimates are free.
Yes, if the goal is reducing cross-draw and tightening what’s accessible. Original convection chases were built without real seams or sealing, so return-side air gets pulled from neighboring units and the chase itself. You can’t fully seal a shared chase, but sealing the reachable joints and penetrations cuts a meaningful portion of the leakage. It’s a targeted repair, not a whole-system replacement.
Because summer humidity is what wets the runs. Hot, humid weather drives condensation on uninsulated duct and joints, especially where window AC units push cold air through warm chases. Once the run stays dry, the mildew cycle stops. Insulating the run and sealing the joints addresses the cause rather than just cleaning the growth. Call (877) 792-7271 for an exact quote; estimates are free.
It’s usually the landlord, with tenant coordination for access. A repair that crosses units needs each tenant’s availability confirmed before the truck is dispatched, so the scheduling conversation typically starts with whoever manages the building. If you’re a tenant reporting a cold room or a musty smell, the fastest path is to loop in your landlord and have them call us. Call (877) 792-7271 for an exact quote; estimates are free.
Book a Duct Repair & Sealing Estimate in Melrose
If your Melrose apartment or building has a room that won’t heat, a musty smell coming from a register, or duct runs you’ve never had inspected, call us. We’ll set up a camera inspection, quote the repair per job, and show you before-and-after photos once the work is done. The local pro we connect you with is licensed and insured as their state requires, and there’s a satisfaction guarantee behind the work. Call (877) 792-7271. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Written by the team at Air Duct Cleaning Washington Heights.