Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Washington Heights?
Duct repair and sealing in Washington Heights typically costs $350 to $1,100 for most homes, with a single leak sealed and re-taped running toward the low end and a larger repair plus whole-system sealing toward the top. Homes above 110th Street in older pre-war buildings often sit in the middle of that range because rigid metal trunk lines need section replacement, not just tape. The written estimate sets the final price, and the estimate itself is free.
That range covers the labor and materials to find the leak, repair or replace the damaged section, and seal the joints so the fix holds. It does not include a full duct cleaning, which is quoted separately. If you’ve noticed dust blowing back out of the registers after a cleaning, musty air in the hallway, or rooms that never get enough heat, the problem is usually leakage at the seams. Sealing closes those gaps so the air you paid to condition actually reaches the room. Call (877) 792-7271 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most Washington Heights duct repairs land between $350 and $1,100.
- Sealing alone (mastic or tape on accessible joints) runs $350 to $600; adding section replacement pushes toward $1,100.
- Older buildings with rigid metal ducts and unsealed plenum connections cost more to reach and repair.
- Estimates are free and the written price is what you pay.
- Our technicians have up to 13 years of experience, and we use Rotobrush, Nikro and Abatement Technologies equipment on every job.
Duct Repair & Sealing Cost Breakdown (2026)
Here’s how the line items break down for a typical Washington Heights job in 2026. These are estimated ranges for the local market, not exact prices. The written estimate is the number that counts.
| Line item | Typical estimated range |
|---|---|
| Leak inspection and airflow check | $0-$150 (often folded into the repair estimate) |
| Sealing accessible joints with mastic or foil tape | $350-$600 |
| Repairing a single damaged flex or metal run | $350-$700 |
| Replacing a section of rigid trunk line | $600-$1,100 |
| Sealing the plenum and main trunk connections | $400-$800 |
| Reconnecting or re-hanging a crushed or disconnected run | $450-$900 |
| Full system sealing (all accessible joints) | $800-$1,400 |
| Duct cleaning before or after repair | Quoted separately, based on square footage and number of vents |
What pushes a Washington Heights job toward the top of the range: rigid metal ducts in pre-war buildings that need a whole section swapped out, leaks hidden behind a ceiling or in a shaft, disconnected runs above a drop ceiling, or a system where every joint was never sealed from the start. What keeps it low: a single loose joint at a register boot, accessible ductwork in a basement mechanical room, or a flex-duct system where one run can be re-taped and re-hung in a short visit.
One thing that’s specific to Washington Heights: a lot of the housing stock here dates to the 1920s through the 1950s, and ducts in those buildings were often added later, run through closets or soffits, and never properly sealed at the plenum. We see this pattern in apartment buildings and two-family homes across the neighborhood, from Fort George up toward Inwood and down toward 155th Street. When a duct system was retrofitted into a building that was never designed for it, the joints and connections are where the air escapes.
What Affects Duct Repair & Sealing Pricing in Washington Heights
Six factors move the number most in this neighborhood. Here’s what to know before you book.
- Building age and duct type. Pre-war buildings with rigid galvanized trunks hold up better but are harder to access and repair. Post-war and newer construction more often uses flex duct, which is cheaper to replace but crushes easily and leaks at every joint if it wasn’t sealed right. A pre-war terrace-level mechanical room or a drop-ceiling run changes the labor either way.
- Access to the ductwork. Ducts behind finished ceilings, in shallow soffits, or routed through a shared shaft cost more to reach. Accessible runs in a basement or utility closet keep the job on the low end. The estimate always accounts for how much wall or ceiling has to come open.
- How many leaks and how far the system runs. A single disconnected run near the air handler is a short repair. A system with leakage at the plenum, at every register boot, and at several trunk joints is a full sealing job. The more of the system that’s accessible, the more of it we can actually seal.
- Rigid metal versus flex duct. Rigid metal sections are more expensive to cut and replace but last longer and seal cleaner. Flex runs are cheaper to swap but need proper support and mastic at the collar or they’ll pull apart again.
- Whether cleaning comes first. Sealing a dirty system traps dust inside and re-contaminates it the first time the air moves. If the ducts haven’t been cleaned, we usually recommend cleaning before sealing. That’s an add-on, not a forced upsell, and the estimate shows it as its own line.
- Whether the leak is also an air-quality problem. A musty smell or visible dust at the registers often means the ducts pulled in moisture or debris through the same gaps. Sealing stops the infiltration, and sanitizing may be quoted if the system needs it. We use Honeywell and Aprilaire filtration products and Guardsman finish products when the job calls for them, and the estimate separates each.
How to Save on Duct Repair & Sealing
A few practical ways to keep the number down in Washington Heights:
- Get the estimate in writing and itemized. A quote that lumps everything together hides where the cost actually is. Ask for each repair, seal, and cleaning line separately so you can see what’s essential and what’s optional.
- Fix the leak before it gets worse. A single loose joint that leaks now pulls in dust and moisture over time, and what starts as a $350 seal can turn into a $900 section replacement if the duct corrodes or the joint pulls apart. Catching it early is the best savings available.
- Bundle a cleaning with the repair when it makes sense. If the ducts are already dirty, cleaning before sealing avoids re-contamination and costs less as part of one visit than as two separate bookings. We’ll show the combined number in the estimate so you can decide.
- Seal what’s accessible now, plan the rest. If some of the system is behind a finished ceiling, sealing the accessible joints today still cuts leakage, and the estimate can note what to address later. You don’t have to do everything at once.
- Ask about dryer vent cleaning as a separate line. It’s a different system, but it’s a real fire risk if lint builds up, and it’s cheaper to add to a scheduled visit than to call out on its own. We do it as a standalone safety service.
The estimate is free. Call (877) 792-7271 and we’ll book a time to look at the system and write it up. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Duct Repair and Sealing Matters More in Washington Heights Buildings
Washington Heights is dense, and much of it is older. Duct systems in these buildings were often run after the fact, through closets, above drop ceilings in hallways, or along exterior walls in a way that leaves long unsealed runs. When those joints leak, the system pulls air from whatever cavity the duct passes through, and that air may be warmer, colder, or dirtier than what the system is supposed to deliver. That’s why apartments in one line of a building can feel stuffy while the line next door feels fine.
Sealing the joints and repairing the damaged runs closes that path. It’s not a cosmetic fix. It’s the difference between conditioning the air in the ducts and conditioning the air behind the walls. That’s the part most one-visit cleanings skip, which is why the dust comes back. A proper duct repair and sealing job resolves the source.
Our technicians have up to 13 years of experience, and we bring Rotobrush and Nikro equipment to the job, along with Abatement Technologies air filtration for containment. That’s the same category of equipment industrial air-quality contractors use, sized for a residential or light-commercial system. It lets us see what’s actually happening inside the ducts instead of guessing. For the full service picture, see air duct cleaning in Washington Heights, and for the repair work specifically, see our duct repair & sealing page.
FAQs – Duct Repair & Sealing Cost
How much does duct repair and sealing cost in Washington Heights?
Most jobs run $350 to $1,100, with the typical Washington Heights estimate landing around $600 to $800 for a repair plus sealing on an accessible system. A single sealed joint at the low end, a rigid trunk section replacement plus plenum sealing at the high end. The written estimate sets the final price. Call (877) 792-7271 for an exact quote; estimates are free.
Is it cheaper to repair or replace ductwork?
Repair and sealing is almost always cheaper than full replacement in Washington Heights, and it solves the same problem when the ducts are structurally sound. A repaired and sealed system typically runs $350 to $1,100, while replacing the full duct system is a much larger project. Replacement only makes sense when the ducts are crushed, badly sized, or beyond repair. An inspection tells you which you’re looking at. Call (877) 792-7271 to book one; estimates are free.
How much does duct cleaning cost in Washington Heights?
Duct cleaning is quoted separately based on square footage and the number of vents, typically in the range you’d expect for a residential system of that size. It’s priced as its own line because it’s a different job from sealing. If you do both, the estimate shows the combined number so you can see the total before you commit. Call (877) 792-7271 for a free estimate.
Can you come today?
Same-day service is often possible, depending on the schedule. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Call (877) 792-7271 and we’ll find the next opening. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Why does duct sealing cost more in some Washington Heights buildings?
Access is the main driver. Ducts behind finished ceilings, in shallow soffits, or inside shared shafts take more labor to reach, and pre-war buildings with retrofitted rigid metal runs often need section replacement rather than a quick tape fix. If the system is accessible, the job stays in the lower part of the range. The estimate accounts for access before the number is written. Call (877) 792-7271 for a free estimate.
What to Ask Before You Book
Before you hand over a deposit or agree to a number over the phone, ask three things. Is the estimate itemized, so you can see what each repair and seal costs separately? Will they inspect the plenum and trunk connections, not just the visible register boots? And is the equipment purpose-built for duct work, or a repurposed shop vac? A proper job uses professional equipment and shows you the estimate before any work begins. We use Rotobrush and Nikro systems and Abatement Technologies filtration, and we clean the system, not just the visible parts.
Duct sealing that holds is what makes a cleaning last. A repair that’s taped and not sealed will pull apart the first time the system pressurizes, and the dust comes right back. That’s the difference between a visit and a fix.
Book a Free Estimate in Washington Heights
If you’re hearing air escape at a register, seeing dust settle faster than it should, or smelling something musty when the heat or AC runs, the leak is likely in the duct system. We handle HVAC cleaning, duct repair & sealing, air duct cleaning, dryer vent cleaning, and air quality sanitizing under one roof, with professional equipment on every job.
Call (877) 792-7271 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the final price, and there’s no fee for coming out to look. Reach out today and we’ll tell you exactly what the repair and sealing will cost for your Washington Heights system.
Pricing reflects the Washington Heights market as of 2026. Air Duct Cleaning Washington Heights offers free estimates – call (877) 792-7271.
What Our Customers Say
"They photographed every return and supply before starting and sent me the file afterward. No upsell to a sanitizing treatment I didn't need."
- Nabil Saleh"Found a disconnected run in the crawlspace while they were in there and told me about it rather than cleaning around it."
- Shannon Mercer"Job was done well and the house smells better. There was some dust knocked loose around a couple of the registers that I had to wipe down afterward."
- Shanice Whitfield