Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Washington Heights Homeowners
The buildings in Washington Heights are hard on ductwork. Pre-war co-ops and walk-ups along Fort Washington Avenue and Cabrini Boulevard were framed and finished long before anyone thought about sealed air distribution, so the ducts that serve them have spent years flexing through seasonal swings, collecting dust, and pulling apart at the joints. That’s why a room can feel cold while the next one overheats, and why dust keeps settling on shelves days after you clean them.
Our technicians have up to 13 years of experience finding those leaks and fixing them properly. A typical repair and sealing visit in Washington Heights is often scheduled for the same day when the schedule allows, and we use Rotobrush and Nikro equipment plus Abatement Technologies filtration for containment-grade dust control. One flat price per system, agreed before any work starts, with before-and-after photos of your own ducts. Call (877) 792-7271. We answer 24/7.
What Our Duct Repair & Sealing Service Includes
Leaking ducts are not one problem – they’re a set of separate failures that all look alike from inside the apartment. A joint that’s slipped apart, a flex run crushed behind a soffit, and a seam that was never sealed at install all show up the same way: weak airflow and dust that won’t stay off the furniture. We treat each one with the method that actually holds.
Duct Sealing
Duct sealing closes the gaps where conditioned air escapes before it reaches the register. You need it when rooms closest to the air handler run warm while far rooms stay cold, or when the system has to run longer than it used to. We map the leaks, seal the accessible joints and seams, and verify airflow at the registers afterward so you can see the difference instead of taking our word for it.

Flex Duct Repair
Flex duct is common in Washington Heights apartment retrofits because it routes easily around pipes and beams. It also kinks, sags, and tears at the collar when it’s stretched tight or crushed by stored boxes. We straighten crushed runs, reconnect and re-tape torn collars, and replace sections that are too damaged to hold pressure.

Metal Duct Repair
Galvanized metal trunk lines in older buildings develop pinholes, failed tape joints, and separations at the elbows. Those small openings add up to a lot of lost air. We repair the failed sections, reseal the longitudinal seams, and check the run for proper support so it doesn’t pull apart again.

Duct Insulation
Uninsulated ductwork running through cold spaces loses heat before the air ever arrives. You’ll notice it as long warm-up times and a system that seems to struggle on the coldest days. We repair damaged insulation jackets and replace sections where the wrap has fallen away or been compressed flat.
Mastic Sealant
Mastic is a brush-on sealant that cures into a flexible, permanent bond – far more durable than duct tape, which dries out and peels within a few seasons. We use it on metal joints and seams where a lasting seal matters. Once it cures, the joint holds pressure instead of leaking air.
Air Leak Repair
Air leak repair is the diagnostic side: finding exactly where the system is losing air before we touch anything. We check joints, collars, plenum connections, and register boots for leaks, then seal what we find. This is a large part of why we offer duct repair & sealing as a full service rather than as a bolt-on to cleaning.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
We service systems built around Honeywell and Aprilaire components, and we know where each of them tends to wear. Honeywell controls and dampers are common in this neighborhood’s buildings, and the connections around them are frequent leak points when the surrounding ductwork has shifted. Aprilaire filtration and humidification units integrate directly with the duct run, so we check the cabinet seals and the bypass connections when we’re sealing a system – a leak at the filter cabinet undoes clean sealing work upstream.
Guardsman products show up in our finish work, which matters after a repair: sealed surfaces stay clean longer and resist the dust film that builds on bare metal. Whether your system uses Abatement Technologies filtration or none of these at all, the diagnostic approach is the same. Whether you have Honeywell or any other make, we can help.
Signs You Need Duct Repair & Sealing Right Now
Most leaking systems send signals for months before a homeowner calls. Here’s what to watch for.
- Rooms that never match the thermostat. One bedroom stays cold while the living room bakes. That imbalance usually means air is escaping before it reaches the far registers, and it gets worse every season the leak stays open.
- Dust returning within days of cleaning. If you dust on a Sunday and the shelves are hazy by Wednesday, the system may be pulling unfiltered air through gaps in the return side. Cleaning the ducts won’t fix that – sealing will.
- A musty smell when the system kicks on. Odor that appears only when the air handler runs points to air drawn through a leak into a damp cavity or mechanical chase. Sealing the opening addresses the source rather than covering the smell.
- Visible sagging or torn flex in closets and chases. If a run looks crushed, kinked, or hanging loose from its collar, it’s losing air and may be close to coming apart entirely. This is worth addressing before cooling season rather than during it.
- Rising energy bills with no change in use. Air that never reaches the room still gets paid for. Leaks push the system to run longer to hit the setpoint, and that shows up on the bill before it shows up anywhere else.
If more than one of these sounds familiar, the system is worth a look. Pairing a repair with air duct cleaning in Washington Heights is the usual sequence: fix the openings first, then clean, so the results last.
Our Duct Repair & Sealing Process – Step by Step
- 1
Walkthrough and airflow check. We start by measuring airflow at the registers and asking what you’ve noticed in each room. The rooms that run weak or strong tell us where the system is losing pressure before we open anything.
- 2
Leak inspection with professional equipment. We trace the duct run using Rotobrush and Nikro inspection tools and check every accessible joint, collar, plenum connection, and register boot. Where accessible, we look for separation at seams and failed tape that looks intact but isn’t holding.
- 3
Written estimate, one flat price per system. You get a written scope of what we found and what it costs, agreed before work begins. No per-vent pricing, no surprise line items once the job is underway.
- 4
Repair and seal. We complete the repairs with mastic sealant on metal joints, proper reconnection on flex runs, and insulation repairs where the jacket has failed. Abatement Technologies filtration keeps dust out of your living space during the work.
- 5
Verification and before-and-after photos. We re-check airflow at the registers and show you photos of the ductwork before and after. You see what changed, and the finished seal is documented for your building records if you’re a property manager.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Washington Heights?
Duct repair and sealing in Washington Heights typically runs from about $350 to $1,200 depending on how many runs need work and how accessible the ductwork is. A straightforward reseal of accessible metal joints on a small apartment system usually lands at the lower end. A multi-run repair with flex replacement, insulation work, and leak chasing in a larger pre-war unit runs higher, because access behind finished walls and through tight mechanical chases takes more time.
What moves the price: the number of runs involved, whether the ducts are reachable through closets and chases or buried behind plaster, whether flex needs replacing or only reconnecting, and whether insulation damage adds a second layer of work. Older buildings with long horizontal runs tend to cost more than compact systems.
How to avoid overpaying: get a written scope before work starts, ask whether the price is per system or per opening, and confirm that sealing is included rather than billed as an add-on after the fact. Our estimates are free, and the written estimate sets the final price – no per-vent metering and no surprises once we’re on site.
| Service | Typical Estimated Range | What Drives the Price |
|---|---|---|
| Duct sealing (accessible joints and seams) | $350 – $650 | Number of runs, access through closets and chases |
| Flex duct repair or section replacement | $400 – $850 | Length of run, number of collars, ceiling access |
| Metal duct repair and mastic sealing | $450 – $900 | Seam count, elbow repairs, support work |
| Duct insulation repair or replacement | $400 – $1,000 | Linear feet of wrap, location of the run |
| Full-system leak diagnosis and repair | $650 – $1,200 | System size, leak count, building layout |
These are typical estimates for the Washington Heights market, not quotes. Every job is priced per system after we’ve seen the ducts.
Duct Repair & Sealing Near Washington Heights – Our Service Area
We connect homeowners and property managers across upper Manhattan and the nearby Bronx with independent local professionals for duct repair & sealing. That includes Highbridge, University Heights, Inwood, Concourse, Morrisania, Tremont, Bedford Park, Fordham, Kingsbridge, Spuyten Duyvil, and Harlem. Buildings in this part of the city share the same pre-war duct layouts and the same seasonal pressure swings, so the diagnostic approach travels well from one neighborhood to the next. For work just across the Harlem River, we also cover duct repair & sealing with the same flat-price-per-system approach.
Serving Washington Heights, NY – Our Local Coverage Area
We serve Washington Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Washington Heights
Duct repair and sealing means fixing the physical openings in your ductwork and closing the gaps where conditioned air escapes. Repair covers torn flex, failed joints, and damaged metal runs; sealing covers the seams and connections with mastic or proper tape so the system holds pressure. It’s different from cleaning, which removes debris but doesn’t fix a leak. In a Washington Heights apartment, the two usually go together: fix the openings, then clean, so the results last.
Most residential jobs in Washington Heights take three to six hours, depending on how many runs need work and how easy the ducts are to reach. A single flex repair or a small reseal can finish in a couple of hours. A full-system diagnosis with multiple repairs in an older building with tight chases takes longer, and we’ll tell you the expected window with the written estimate. Call (877) 792-7271 for an exact quote – estimates are free.
Typical estimates in Washington Heights run from about $350 for a straightforward reseal to $1,200 for full-system leak diagnosis and repair, priced per system. The written estimate sets the final price, and we agree it with you before work starts. Call (877) 792-7271 for an exact quote – estimates are free.
Cheap quotes usually cover less than they appear to: a quick tape job on visible joints, no leak diagnosis, and no verification after the work. Tape peels within a season, and the leak you actually have may be somewhere the crew never looked. We use mastic sealant on metal joints because it holds, we check airflow at the registers afterward, and we show you before-and-after photos of your own ducts so you can see what was done. Call (877) 792-7271 for an exact quote – estimates are free.
We document it: before-and-after photos of your ductwork, and an airflow check at the registers when we finish. You’ll see the sealed joints and the repaired runs, not just a verbal report. If you manage a building, those photos are useful for your own records. Call (877) 792-7271 for an exact quote – estimates are free.
Same-day service is often available when the schedule allows, and our dispatch hours are Sunday through Friday, 7am to 7pm; we’re closed Saturday. The phone line is different from dispatch: we answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (877) 792-7271 to check availability for your building.
Clear access to the registers, closets, and any chases the ductwork runs through, and move fragile items away from those areas. If you know which rooms run hot or cold, tell the technician – that information points straight to the problem zones. Pets should be kept in a separate room while equipment is running. Beyond that, there’s nothing to prepare; we handle the containment and cleanup with our filtration equipment.
Schedule Your Duct Repair & Sealing Service in Washington Heights Today
Leaks in your ductwork don’t close on their own, and every season they stay open costs you air you’re already paying for. Call (877) 792-7271 to book a visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a free, no-obligation estimate with one flat price per system, agreed before any work starts, plus before-and-after photos when we’re done. Our technicians have up to 13 years of experience and we can work with your schedule to get the repair done right.
Written by the team at Air Duct Cleaning Washington Heights.